Huawei MTK Unlock

Supported Phones

  • Huawai G7010
  • Huawai G6
  • Huawai G6150
  • Huawai G7007
  • Huawai G5730

Before you start.

  1. Run the unlock client from “START > Multi Unlock Client > Unlock Client”
  2. You will also need to enter your username and password and click “save login data”
  3. Make sure “main Server” is selected under the settings tab
  4. Make sure you click “Save Login Data”

please make sure if you copy and paste or enter User details manually that you do not inadvertently put a space at the beginning or the end of the user name or the password, this will cause the message “unable to get balance or counter zero”.

Multi Unlock Client User Details

IMPORTANT: Windows Vista and Windows 7 users.
You must run the unlock client as administrator (right click on the shortcut to run the unlock client and select “Run as Administrator”)
This will prevent the "Unable to extract to Disk" Error, when starting the software.

Step 1. Prepare the phone.

  1. Power on the phone without a SIM card.
  2. Enter on the phone: *#482934#
  3. Select “UART Settings”
  4. Make the following settings

    a. TST-PS Config -> NONE
    b. PS Config -> USB PORT
    c. TST L1 Config -> NONE

  5. Press Confirm (V).

Step 2 Install Drivers

  1. Run the InstallDrivers.exe from MTK drivers folder (C:\Program files\Multi Unlock Client\ Mtk Drivers)
  2. Use installdrv64.exe if you are on a 64 bit operating system.
  3. Connect phone and make sure the drivers are installed.

Step 3 Unlock the phone

  1. Now the phone should be connected, with the correct UART settings and the drivers installed
  2. On the unlock client, click on the HUAWEI tab.
  3. Click “unlock”, the software will now read the unlock code from the G7010
  4. Now remove the phone, insert an incorrect SIM, power on, when prompted enter the code displayed in the unlock client window.

Driver Installation (if drivers not automatically installed at Step2)

Windows XP

When the new hardware wizard appears:

  1. When asked if you would like windows to search for a driver, select “No not this time”,
  2. Then select “Install from a list or specific location”, then click “Next”
  3. Then select “Search for the best driver in these locations”, then check “Include the following location”
  4. on the next screen click on “Browse”
  5. Browse to “C:\Program Files\Multi Unlock Client\Palm Pre\Drivers” or “C:\Program Files\Multi Unlock Client\ Mtk Drivers”
  6. Click “Next” and the wizard will install the drivers
  7. Once the drivers are installed, Unplug & replug phone, click “OK” on the unlock client dialog box.

Windows Vista & Windows 7.

The easiest way on Windows Vista and Windows 7 to install the drivers is as follows.

  1. When the new hardware wizard appears, cancel it.
  2. Right Click on “My Computer” or “Computer” and select “Properties”
  3. On the next screen, select “Device Manger”
  4. On the next screen you will see the device we want to install the driver for with a Yellow Asterisk next to it.
  5. Right Click on this entry and Select “Update Driver Software”
  6. When asked if you would like windows to search for a driver, select “No not this time”
  7. Then select “Install from a list or specific location”, then click “Next”
  8. Then select “Search for the best driver in these locations”, then check “Include the following location”
  9. on the next screen click on “Browse”
  10. Browse to “C:\Program Files\Multi Unlock Client\ Mtk Drivers”
  11. Click “Next” and the wizard will install the drivers
  12. Once the drivers are installed, Unplug & replug phone, click “OK” on the unlock client dialog box.